HCI Cable Identifier

HCI Cable Identifier

Introduction

    Identifying a certain cable correctly from a bunch of cables is a common tech question for power cable engineer and cable workers. Cable identifying will avoid severe damage resulting from sawing wrong cable. Cable identifying usually need professional person proceed from 2 ends of cable, and make sure the two numbers are correct. But, human memory is not as reliable as professional device at any time in any circumstance. HCI adopts the Smart concept and integrates a number of patented recognition technologies. Under correct operation, the accuracy of the recognition results is 100%.

Contact Us

Details

Features:
On-site application:
Technical Data:
Transmitter
Display
LED signal strength indicator (red/yellow/green)
LED battery status indicator (red/yellow/green)
One-button operation
ON/OFF
Pulse Voltage
100V, DC
Pulse current
0-300A
Pulse frequency
30 times/min
Pulse width
60ms
Power supply
AC 100-240V, 50 Hz or built-in 12V lithium battery
On-site use time
Over 6 hours, continuous use
Charge time
6 hours
Weight
1.5kg (no battery); 3kg ( with battery)
Size
325 x 248 x 125 (mm)
Receiver (LED optional)
Display
LCD screen indicates the target cable (target cable)
LCD screen indicates non-target cable (no signal)
Clamp
Flexible clamp, φ19mm
Gain
10gears (-3dB to +24 dB)
Power supply
4 x AAA
On-site use time
>50hours
Weight
400g (with clamp and battery)
Size
165 x 80 x 30 (mm)
CONTACT WITH US
  • captcha