Hydraulic cutter principle and routine maintenance should pay attention to what

Hydraulic cutter principle and routine maintenance should pay attention to what? Hydraulic cutter is now being used more and more widely in the cable cut off, in the power construction links played a significant role. In addition to the quality of the hydraulic cutter itself to be excellent, to understand the use of hydraulic cutter principle, the way the daily shelf maintenance and maintenance is still very necessary.
    
    The use of hydraulic cutter and work problems encountered. The following for everyone:
    
    A hydraulic system installed in the rack above; all sets of knife installed in the hydraulic system under the cylinder above the cylinder; cutter group, including: a knife set A pair of chute installed in the knife on both sides of the edge; two cutter, one for the knife for a knife, moving knife installed in the slide, the knife and the cylinder fixed; Knife were opened with knife-edge, for the same shape and dislocation overlap.
    
    2: Hydraulic cutter is a kind of cutter, commonly used in electrical engineering. There are a few places to note:
    
    1, Hydraulic oil pump belt is a bit loose, the speed is not enough to cause oil shortage, tighten the V-belt.
    
    Check if the hydraulic tubing is oily. The time of the knife and the knife can be adjusted.
    
    2, Hydraulic oil is less, work for some time hydraulic oil heat, the pressure becomes smaller, add a little more hydraulic oil.
    
    

Beit EC-50 electric hydraulic cutter has the following characteristics:

Automatic pressure relief, two-stage hydraulic system. Cutting work faster, lighter, easier cutting. Open head design, 360 degrees free rotation. Manual pressure relief button, press the middle of the release, fast reset
    
     Output: 6T

     Maximum cutting range: Φ50mm copper / aluminum cable
    
     Weight: 4.7kg

     Packing: plastic box
    
     Hydraulic cutter principle and routine maintenance should pay attention to what? If you are interested in our Bette hydraulic press, or would like to know more about maintenance and maintenance information, you can quickly call the National Uniform Service Hotline: 400-852-3665, or click on the online customer service consultation, get tailored for you The power of the construction program it.