Introduction
Identifying a certain cable correctly from a bunch of cables is a common tech question. Cable identifying will avoid severe damage resulting from sawing wrong cable. Cable identifying usually need professional person proceed from 2 ends of cable, and make sure the two serious numbers are correct. But, human memory is not as reliable as professional device at any time in any circumstance.
ECI is applicable for identifying low voltage live cable 220V/380V, and the identification of low voltage section.
It can identify the target cable and low-volt section without power off. 100% correct result under correct method.
Transmitter (ECI-10T)
|
||
Working voltage
|
AC 220V, 50Hz
|
|
Periodic impulse current
|
180A±10A
|
|
Impulse frequency
|
30 times/min
|
|
Display mode
|
RED/GREEN LED
|
|
Power supply
|
Lithium battery
|
|
Weight
|
500g
|
|
Size
|
158 x 90 x 60 (mm)
|
|
Receiver (ECI-10R)
|
||
Display
|
LCD screen indicates the target cable (target cable)
LCD screen indicates non-target cable (no signal) |
|
Keys press mode
|
Touch button
|
|
Gain
|
10gears (-3dB to +24 dB)
|
|
Power supply
|
2 x 1.5V AA
|
|
On-site use time
|
>60hours
|
|
Clamp
|
Flexible clamp
|
|
Weight
|
400g (with clamp and battery)
|
|
Size
|
118 x 78 x 24 (mm)
|
To be an international, standardized and sustainable corporation is our consistent pursuit. We sincerely welcome customers from home and abroad to visit our company.